![\""Build](\"https:\/\/www.disneyexperience.com\/news\/wp-content\/uploads\/2020\/03\/xwbj13_01.jpg\")
<\/a><\/p>\nWell, month 11 is here, and that means that it’s time for the third and final free gift: a set of X-Wing bookends! I was so anxious to for the box to arrive; I waited all day. The UPS driver must have been behind that day, because the box was not delivered until 7 pm. Imagine my surprise when instead of a bulky box, there was just the standard thin, white Model Space<\/em> box. Bummer!<\/p>\n I contacted Model Space<\/em> about the issue, and they said that it was on back order. They were working with other branches of Model Space<\/em> to restock their inventory. No estimated shipping date could be given. Sigh. The X-Wing bookends would have been a nice little “Christmas gift.”<\/p>\n It’s time to weather the wings! Throughout this process, I referred to the reference pictures (download<\/a>), but kept in mind that I do have some creative freedom since the finished model will not be a perfect copy.<\/p>\n I began with some simulated paint chipping. I just used some extra base color to paint the chipping onto the red markings. I know that there are other, more realistic ways to do this, but sponging the paint on is just fine, too.<\/p>\n <\/p>\n Next, it was time to dirty up the pristine paint. Working in sections, I moistened the area and applied daubs of paint\u2014gray and a couple of different browns\u2014to add some age and dirt. With a damp brush, I spread the paint in a streaking motion to blend them. This also filled in the panel lines and crevices, bringing out the greeblies.<\/p>\n <\/p>\n Next, I added some dust. Is this space dust? It covers a lot of the X-Wing, especially on the forward edges.<\/p>\n <\/p>\n Using some Tamiya<\/em> Weathering Master Set B<\/a>, I applied “soot” all over. The engine exhaust port got some “snow”. Using Tamiya<\/em> Weathering Master Set C<\/a>, I used a small brush dipped in isopropyl alcohol (70%)<\/a> to mix and apply “orange rust” in a few places.<\/p>\n <\/p>\n The soot was not as dark as I’d like it to be in some places, so it needed to be enhanced with some airbrushing.<\/p>\n For the blaster marks, I took my own approach and used a wood-burning tool<\/a> with a fine tip to melt holes into the plastic. I airbrushed some added char where needed, I painted the holes black, and I cut off the excess melted plastic with a hobby chisel blade<\/a>.<\/p>\n <\/p>\n Lastly, I used some isopropyl rubbing alcohol (70%) to remove some soot from the engine pipes and along some of the edges.<\/p>\n <\/p>\n Scraping away the excess melted plastic creates natural light edges around the blaster areas.<\/p>\n <\/p>\n Now, all that is needed are some coats of glossy varnish for durability against bumps and scrapes, followed by some matte varnish for a nice flat finish.<\/p>\n <\/p>\n Work continues on the third wing, which has another set of landing gear doors. Closed, the doors sit nice and snug. But, they can be hard to open since there isn’t a lip for good finger purchase.<\/p>\n I may glue a piece of metal to the inside of one of the doors, and then use a strong magnet to pull the doors open.<\/p>\n The external engine is completely assembled this month. I think it was previously split over two months.<\/p>\n <\/p>\n With the external engine assembled, I filled in some of the gaps with J-B Weld PlasticWeld<\/a>. If you use this stuff, I recommend wearing disposable gloves<\/a> as this stuff is sticky. It loves to stick to skin, and it doesn’t come off easily until it hardens.<\/p>\n I use wax carving tools<\/a> to trowel the PlasticWeld into the crevices, and then I use a homemade mini power sander<\/a> to sand it smooth.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nFree Gift: X-Wing Bookends<\/h2>\n
<\/a><\/p>\nWeathering the Wings<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nCompleting the Laser Cannon<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nExternal Engine<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n