![\""Build](\"https:\/\/www.disneyexperience.com\/news\/wp-content\/uploads\/2020\/04\/xwbj17_01.jpg\")
<\/a><\/p>\nIt’s time to finish the thruster by assembling the exhaust port, adding some greeblies to the outside of the casing, and adding the electronics.<\/p>\n Of course, testing the light before and after assembly is crucial.<\/p>\n Moving to the wing, I work on some internal components, starting with the two metal supports.<\/p>\n <\/p>\n Next is the wiring and attaching the thruster engine to the wing. I now label all of the wires with an ultra fine Sharpie<\/a> and I rip off the numbered paper tags for a cleaner look.<\/p>\n <\/p>\n For the cover plate, I forewent using the supplied plugs and just filled the screw holes with J-B Weld PlasticWeld<\/a>. The next day, I sanded the areas smooth.<\/p>\n <\/p>\n After completing the wing, I realized that I forgot to fill & sand the gaps in the wing and the thruster engine. It was too late to remove the thruster engine from the wing, so there were a couple of areas that I could not get to.<\/p>\n <\/p>\n Well, DeAgostini<\/em> finally noticed their labeling mistakes on the main engine pipes. They actually got them labeled correctly this time . . . mostly. Pipes ‘G’ and ‘H’ are still reversed.<\/p>\n <\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nThe Thruster<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nThe Wing<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nMain Engine<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n